供求
新闻
品牌
产品
公司
资料
论文
方案
Supply Voltage | 10 to 30V dc (10% maximum ripple) at less than 18 mA, exclusive of load |
---|---|
Range | Opposed Mode (Visible Red):10 m Opposed Mode (Infrared):15 m Polarized Retro:4 m Retro:6 m Diffuse- Long Range (Visible Red):800 mm Diffuse- Long Range (Infrared):1500 mm Diffuse- Short Range:250 mm |
Supply Protection Circuitry | Protected against reverse polarity and transient voltages |
Output Configuration | 100 mA with short circuit protection OFF-state leakage current: NPN:< 10 μA sinking
PNP:< 200 μA sourcing
ON-state saturation voltage:NPN:< 1.6V @ 100 mA
PNP:< 3.0V @ 100 mA
|
Output Response Time | Opposed Mode:1 millisecond ON/600 microseconds OFF All others:800 microseconds ON/OFF NOTE:100 millisecond delay on power-up; outputs do not conduct during this time |
Repeatability | Opposed Mode:140 microseconds All Others:155 microseconds |
Adjustments | Diffuse, Retroreflective, and Polarized Retroreflective models (only):Single-turn Sensitivity (Gain) adjustment potentiometer |
Indicators | Two LED Indicators: Power (green) and Signal (yellow) Green ON steady:Power ON Yellow ON steady:Light sensed Green flashing:Output overloaded Yellow flashing:Marginal excess gain (1 to 1.5X) |
Construction | Housing:ABS Lenses:PMMA Gain Adjuster:PBT |
Connections | 2 m (6.5') or 9 m (30') 4-wire PVC cable, 150 mm (6 |
Operating Conditions | Temperature:–20° to +60° C (–4° to +140° F) Relative Humidity:95% @ 50° C (non-condensing) |
Environmental Rating | IEC IP67 (NEMA 6) and 1200 PSI washdown NEMA ICS 5, Annex F-2002 |
Vibration and Mechanical Shock | All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 |
Certifications | Approvals pending |
共0条 [查看全部] 网友评论